It's not really a secret that a fan with more depth will greatly increase CFM + Static Pressure; there's a reason that most server racks will commonly utilize 38mm depth fans. The included rubber dampeners and the unique rigid frame design further reduce vibrations and noise. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more! It's like everyone telling those super small nuc or whatever to get Arctic P12s or Noctua A12x25's but their clearance in their case left is only suitable for 10/15mm fans. A perfectly balanced milky-colored 7-blade impeller design is optimized for light dispersion and high static pressure operation while maintaining a low noise profile throughout the whole operational range of the fan.

Phanteks T30 - The 120mm Fan to Beat in 2021 | Overclockers Phanteks T30 - The 120mm Fan to Beat in 2021 | Overclockers

The D30-120 combines premium D-RGB lighting with 30 mm thick and aerodynamic fan blades inspired by the ultimate T30 fan, which makes it a true premium D-RGB fan for modern systems.on the reverse, and static pressure on the reverse ones isn't such an issue as you would normally have them as an intake without a rad or on top as a pull fan on an intake maybe. The PH-F140HP II, 140mm high static pressure premium fans from Phanteks is designed with the Maelström concept technology.

T30 Review - STS Tutorial Phanteks T30 Review - STS Tutorial

I love that the connectors further clean up the fans exterior profile and caps to hide screws but that is also my one complaint.I read a comment on another thread about Radiator Fans from one of our Members - johnrimm - He wrote that the Radiator Fan on His Xtrail hardly ever runs - words to that effect. One of the key features of the new EK-Loop Fan FPT D-RGB fan is its simplicity - it uses the standard 3-pin 5 V D-RGB connection, meaning you can use it with any standard 3-pin 5 V addressable RGB controller or any of the popular RGB sync technologies from all major motherboard manufacturers. For each fan, there is a 15mm long PWM cable with a daisy-chain PWM header attached right next to the fan. Do be careful with this mode though, as it’s so fast that you will hurt your fingers in the fan if you touch it during operation.